Dürkopp Adler 667 PREMIUM, Service Instructions Manual

Page: 117 / 150

Programming
Service Instructions 667 PREMIUM - 03.0 - 01/2018 115
11. Press the OK button to confirm the selection.
12. Press the
►
button; the selection
Destination
,
Select All
,
Deselect All
appears.
13. Select the
Destination
option with the ▲
/
▼ buttons.
14. Press the OK button to confirm the selection.
15. Select the desired folder with the ▲
/
▼ buttons or press the
►
button
and create a new folder with the
Create Folder
option.
16. Press the OK button to confirm the selection.
17. Give the folder a name using the numeric buttons.
18. Press the OK button to confirm the name.
19. Press the
►
button and select the
Copy
option.
20. Press the OK button to confirm the selection.

The data transfer begins and a message appears, stating that the
USB key must not be removed:
Fig. 79: USB key warning

The message disappears after the data transfer.
14.11.4 Saving the Error list (
Error Log
) parameter
The error list can be saved to a USB key.
To save the error list to a USB key:
1. Plug the USB key into the control.
2. Select the
Error Log
parameter and press the OK button to confirm.

A warning appears - the USB key will be erased completely before
the error list is compiled!
3. Press the OK button to acknowledge the error message.

The error list is written to the USB key.
14.12 Performing a software update
When a new software version is available, this can be downloaded from
www.duerkopp-adler.com and loaded into the control via a USB key.
All settings on the machine are retained.
To load software via a USB key:
1. Switch off the machine at the main switch.
2. Plug the USB key into the socket (1) on the control (2).
+
Don´t remove USB!
Please Wait!