Dürkopp Adler 667 PREMIUM, Service Instructions Manual

Page: 102 / 150

Programming
100 Service Instructions 667 PREMIUM - 03.0 - 01/2018
14.7.12 Setting the QONDAC (
QONDAC
) parameter
Machines can be interlinked to allow for networked operation. Various set-
tings can be made for the networking of the machines. The possibilities
are explained in more detail in the table.
For detailed information on how to network machines, refer to the documen-
tation of the QONDAC.
14.7.13 Setting the Fast menu keys (
FastMenuKeys
) parameters
The fast menu keys can only be used in manual mode. They are shown in
the bottom section of the display on the control panel. None of the param-
eters that may have been selected for the info screen are displayed.
Program
Selective restriction of access to the existing program and its
parameters
R/W – Read/Write
Off – Area is hidden
R/O – Read Only
Programming
It is not possible to create new programs; it is not
possible to edit existing programs
(Value range: On/Off)
St.Len.Corr
Restriction of access to the correction factor for the
stitch length
(Value range R/W, OFF, R/O)
Tens.Corr
Restriction of access to the correction factor for the
needle thread tension
(Value range R/W, OFF, R/O)
Menu item Setting options
On/Off
QONDAC active/inactive
Customer ID
Editor that lets you set the customer ID
Ethernet Config
Adjustment of the Ethernet configuration
Symbol Meaning
Start bartack
(off/single/double)
End bartack
(off/single/double)
Menu item Setting option