Dürkopp Adler 667 PREMIUM, Service Instructions Manual

Page: 100 / 150

Programming
98 Service Instructions 667 PREMIUM - 03.0 - 01/2018
14.7.9 Setting the Programs (
Programs
) parameter
Various settings can be made for the programs. The possibilities are ex-
plained in more detail in the table.
14.7.10 Setting the Electronic handwheel (
Jog-Dial
) parameter
The electronic handwheel can be activated or deactivated.
Menu item Setting option
Forward Sound
Sound when changing between two seam sections.
(Value range: On/Off)
Seg.Switch
A switch between two seam sections is usually carried out with the
►
button. This function can also be assigned to Position -2 on the pedal.
(Value range: On/Off)
Notice:
Position -2 actually causes a cancelation when actuated during a seam
section. If the section change function is assigned to Position -2,
the softkey menu can be used for a cancelation (it is still possible to
continue sewing from that point; for a full cancelation of the program,
press the pedal in Position -2 again).
Abort Mode Position
After the cancelation, the needle is merely brought to its
end position and the thread is cut (if activated).
Seg.End
Ending of the program with all configurations that are set
for this seam section.
Thread Trim
The thread cutter becomes active or remains inactive when a seam
section is canceled.
(Value range: On/Off)
Pedal Abort
Abort a program by pressing the pedal in Position -2 twice.
(Value range: On/Off)