Dürkopp Adler 667 PREMIUM, Service Instructions Manual

Page: 143 / 150

Troubleshooting
Service Instructions 667 PREMIUM - 03.0 - 01/2018 141
18.4 Error in the software
In rare cases, it may happen that no more menus can be called up after
an error message. Even restarting the machine does not eliminate this
problem.
6362 Information No valid data on internal EEprom
(internal data structures are not
compatible with the external data
storage device) • Check machine ID connec-
tion
• Switch off the control, wait
until the LEDs are off and
then switch on again
• Software update
6363 Information No valid data on internal and
external EEprom
(Software version is not compa-
tible with the internal data storage
device, emergency operating fea-
tures only) • Check machine ID connec-
tion
• Switch off the control, wait
until the LEDs are off and
then switch on again
• Software update
6364 Information No valid data on internal EEprom
and external EEprom not connec-
ted
(the internal data structures are
not compatible with the external
data storage device, emergency
operating features only) • Check machine ID connec-
tion
• Switch off the control, wait
until the LEDs are off and
then switch on again
• Software update
6365 Information Internal EEprom defective • Replace the control
6366 Information Internal EEprom defective and
external data not valid
(emergency operating features
only) • Replace the control
6367 Information Internal EEprom defective and
external EEprom not connected
(emergency operating features
only) • Replace the control
7270 Information External can • Check connection cables
• Software update
• Replace CAN Slaves
9330 Information Fabric thickness sensor not
connected • Check connection cables
• Software update
• Replace fabric thickness
sensor
9340 Error Bobbin control not connected • Check connection cables
• Software update
• Replace bobbin control
9922 Error Service Stop • Check the service stop
switch
• Check the 24V
• Replace the control
Code Art Bedeutung Abhilfe