Dürkopp Adler 667 PREMIUM, Service Instructions Manual

Page: 74 / 150

Programming
72 Service Instructions 667 PREMIUM - 03.0 - 01/2018
14.5
Default Program
submenu
Customer-specific settings can be made here, which are automatically
used as preset values for the first seam section during the creation of a
new program. Select the values so that they can be retained for as many
programs as possible.
The menu is divided into the following submenus:
14.5.1 Setting the Stitch length (
Stitchlen.
) parameter
Stitch length that should be set as standard when creating a new program.
To set the stitch length parameter:
1. Select the
Stitchlen.
parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value.
4. Press the OK button to confirm the value.
Parameter Explanation Reference
Stitchlen.
Stitch length

p. 72
Foot Press.
Foot pressure

p. 73
Thr.Tens.
Needle thread tension

p. 73
Foot Stroke
Sewing foot stroke

p. 73
Start Tack
Start bartack

p. 74
End Tack
End bartack

p. 74
Thread Trim
Thread cutter

p. 74
DailyPieces
Daily pieces counter

p. 74
NOTICE
Property damage may occur!
The machine and the sewing equipment may be damaged.
ALWAYS adjust the stitch length to the selected sewing equipment.