Dürkopp Adler 667 PREMIUM Service Instructions Manual Download Page 24

Page: 24 / 150

Working basis

Service Instructions 667 PREMIUM - 03.0 - 01/2018

3.4.6

Disassembling and assembling the feed dog

Fig. 10: Disassembling and assembling the feed dog

Proper setting

The feed dog does not touch the throat plate with the maximum permissi-
ble stitch length.

Disassembling the feed dog

To disassemble the feed dog:

Execute the service routine

Feed Dog > Assemble

(



p. 14



The software is used to define the necessary presettings on the
machine.

Important

The maximum permissible stitch length can be set in the service routine.
Enter the maximum permissible stitch length before pressing the button

Tilt the machine head (



p. 17

Loosen the screws (3).

Remove the feed dog (1) from the feed dog carrier (2).

Assembling the feed dog

To assemble the feed dog:

Place the feed dog (1) onto the feed dog carrier (2).

Tighten the screws (3).

Erect the machine head.

Finish the service routine.

(1)

- Feed dog

(2)

- Feed dog carrier

(3)

- Screws

③

②

①

Summary of Contents for 667 PREMIUM























































































































































Search results

Summary of Contents for 667 PREMIUM

Reviews:

Related manuals for 667 PREMIUM

Brands by name

Popular brands

Dürkopp Adler 667 PREMIUM, Service Instructions Manual

Search results

Summary of Contents for 667 PREMIUM

Reviews:

Related manuals for 667 PREMIUM

Brands by name

Popular brands