Dürkopp Adler 667 PREMIUM, Service Instructions Manual

Page: 4 / 150

Table of Contents
2 Service Instructions 667 PREMIUM - 03.0 - 01/2018
10.1 Setting the sewing foot lifting gear ............................................ 50
10.2 Setting an even sewing foot stroke ........................................... 51
10.3 Setting the stroke movement for the feeding foot ..................... 52
10.4 Setting the sewing foot pressure and sewing foot lift................ 54
11 Setting the needle thread tension ......................................... 56
11.1 Setting the needle thread regulator .......................................... 56
11.2 Setting the thread tension spring .............................................. 57
11.3 Electronic needle thread tension .............................................. 58
12 Winder...................................................................................... 59
12.1 Setting the winder ..................................................................... 59
12.2 Setting the hook thread guide ................................................... 62
13 Thread cutter........................................................................... 63
13.1 Setting the control cam position................................................ 63
13.2 Setting the armature of the thread cutter magnet ..................... 64
13.3 Setting the position of the thread-pulling knife .......................... 65
13.4 Setting the cutting pressure ...................................................... 66
14 Programming .......................................................................... 69
14.1 Calling up the Technician level ................................................. 69
14.2 Structure of the software........................................................... 69
14.3 Lock technician level (
Lock Techn.
) submenu...................... 70
14.4
ParameterCall
submenu ...................................................... 70
14.5
Default Program
submenu.................................................. 72
14.5.1 Setting the Stitch length (
Stitchlen.
) parameter ................. 72
14.5.2 Setting the Foot pressure (
Foot Press.
) parameter ............. 73
14.5.3 Setting the Needle thread tension (
Thr.Tens.
) parameter .... 73
14.5.4 Setting the Sewing foot stroke (
Foot Stroke
) parameter...... 73
14.5.5 Setting the Start bartack (
Start Tack
) parameter ................. 74
14.5.6 Setting the End bartack (
End Tack
) parameter ...................... 74
14.5.7 Setting the Thread cutter (
Thread Trim
) parameter.............. 74
14.5.8 Setting the Daily pieces counter (
DailyPieces
) parameter... 74
14.6
Machine config.
submenu.................................................. 75
14.6.1 Setting the Thread cutter (
Thread Trim
) parameter.............. 76
14.6.2 Setting the Thread clamp (
Thread Clamp
) parameter ........... 77
14.6.3 Setting the Speed (
Speed
) parameter...................................... 79
14.6.4 Setting the Stop positions (
Stop Positions
) parameter ...... 79
14.6.5 Setting the Sewing foot (
Foot
) parameter ............................... 80
14.6.6 Setting the Needle thread tension (
Thr.Tens.
) parameter .... 80
14.6.7 Setting the Sewing foot stroke (
Stroke
) parameter ................ 81
14.6.8 Setting the Stitch length (
Stitchlen.
) parameter ................. 82
14.6.9 Setting the Bobbin (
Bobbin
) parameter................................... 82
14.6.10 Setting the Motor holding force (
Holding Force
) parameter 83
14.6.11 Setting the Pedal (
Pedal
) parameter ....................................... 84
14.6.12 Setting the Needle cooling (
NeedleCooling
) parameter ....... 84
14.6.13 Setting the Seam center guide (
Center Guide
) parameter... 85
14.6.14 Setting the Puller (
Puller
) parameter..................................... 85
14.6.15 Setting the Edge guide (
EdgeGuide
) parameter ..................... 87
14.6.16 Setting the Material thickness detection
(
FabricThickness
) parameter.............................................. 87