39
POOL LIGHT
38
3.2.2. Pool light synchronisation
This synchronisation option is not used for ON/OFF pool lights and
PLC controlled pool lights
Synchronization is only required for the toggle pool lights, to ensure that all
pool lights are running the same color scene.
This process of synchronising the scenes generally takes 45 seconds to
complete.
Please follow the below sequence to synchronise the ‘toggle’ pool lights:
-
Touch the display on the LINK Touch for 3 seconds
-
This will activate the settings menu, use the arrow to navigate
-
Go to menu “Lights setting enter” and touch the display to enter
-
The display will show the option “On/Off Sync start”
-
Touch the display to activate this option. The lamps will go in a syn
chronisation mode, this will take about 45 seconds.
-
Wait for all pool lights to turn the same color blue. This means the
synchronisation has successfully been completed.
3.2.3. Manual pool light synchronization
When the toggle pool lights get out of synchronisation and no longer dis-
play the same color, a manual synchronisation needs to be performed to
get the pool lights back into synchronisation. This manual synchronisation
can be triggered from the LINK Touch.
The manual synchronisation procedure entails the turning ON and OFF of
the pool lights in a specific time pattern. At the end of the manual synchro-
nization, the pool lights will go into the blue scene.
3.3. Operation
3.3.1. LinkTouch
The LINK Touch can be used to control the pool lights wirelessly, the LINK
Touch provides the following functions:
-
Turning pool lights On/Off
-
Dimming of the pool lights (PLC pool lights only)
-
Changing the color (only for RGB pool lights)
-
Changing color scenes (predefined by DuraVision)
-
Changing CCT (Correlated Color Temperature) for RGB and TW
pool lights
