27
LINK M
ASTER
26
2.3. Operation
When the configuration has been completed the LINK Master is ready for
daily use. The LINK Master will standard and therefore in most cases be run-
ning in the automatic mode.
•
Automatic mode (
→
2.3.3.)
Additional operation modes & informations are available and
explained in the following chapters.
•
Pairing mode (
→
2.3.2.)
•
Manual mode (
→
2.3.4.)
•
Alerts and errors (
→
2.3.5.)
2.3.1. Keypad operation
2.3.1.1. Controller keypad
Manual button
Filling button
Aux button
Cover button
Used for switching between
manual and automatic
mode.
Used for enabling/dis-
abling the filling mode of
the pool.
Used for turning Auxiliary port
on or off.
This button will open/
close the pool cover
DuraLink button
Heating button
Sensors button
Relay A button
Used for enabling/disabling
discovery mode.
Used for turning the heat
pump on or off.
Used for turning the sensors
on or off.
(By default this led is on.)
Used for activating your
Relay A function. (
→
2.2.3.)
Cleaning button
Filtration button
Lights button
Relay B button
Used for enabling/disabling
cleaning mode for the pool
Used for turning the filtra-
tion pump on or off.
Used for turning the pool lights
on or off.
Used for activating your
Relay B function (
→
2.2.3.)
ECO MULTI-BRAND INVERTER
ECO INVERTER
- Off
→
Everything is off
