21
LINK M
ASTER
20
2.2.3. Configure other devices
Before continuing with the pairing of the LINK Touch (
→
2.2.6.) it is import-
ant that all installed devices are correctly paired with the LINK Master.
-
Pool lights (
→
3.2.)
-
Heat pump (
→
4.2.)
-
Filter pump (
→
5.2.)
2.2.4. Configure relays A & B
Before continuing with the configuration of the relays, please ensure the
DuraCloud App has established the owner role for the pool. (
→
2.2.2.2.)
-
Ensure the DuraCloud App is connected to the same network as the
LINK Master.
-
Open the DuraCloud App on your device
-
Select the pool you wish to configure
-
When the DuraCloud App has the owner role for this pool, a settings
icon will show in the top right corner.
-
Click on the settings icon
-
You can now change relays A & B to the preferred mode.
-
Relay A
- OFF
-
Open multi-brand cover
- Toggle
- Pulse
- FilterpumpBoost
-
Relay B
- OFF
-
Close multi-brand cover
- Toggle
- Pulse
- Filling
The available options for setting the relays are directly related to the
connected devices.
For example; when using the DuraCover both relay A and B remain free,
however when using a Multi-Brand cover both Relay A and B are assigned
for the opening and closing of the cover and cannot be used for any other
functionalities.
2.2.5. Configure input C as level sensor
Input C cannot be manually configured, it works according to the following
rules:
-
The level sensor must be connected to input C (see technical
installation)
-
The level sensor will only be active when relay B is set as “filling”
-
The filing control system which is connected to the LINK Master will
be activated
2.2.6. LINK Touch pairing
To operate the LINK Master using the LINK Touch remote control, a con-
nection needs to be establish first, by pairing the two devices.
-
The “Pairing” mode will allow the LINK Touch to establish a wireless
connection with the LINK Master.
-
During this pairing sequence the LINK Touch needs to be in close
proximity (<2m) of the LINK Master.
After completing this pairing sequence the LINK Touch will be able to ‘wire-
lessly’ operate the installed House of DURATECH devices (Heat pump, Pool
lights and Cover) or similar multi-brand components (limited functions).
Steps for pairing:
-
Press the DuraLink button on your controller keypad.
-
The DuraLink button will switch ON and go in ‘Pairing’ mode for 15
minutes
