51
FIL
TER PUMP
50
4.5. Safety conditions
-
Please refer to the ‘DURAHEAT’ heat pump manual for specific
safety conditions.
-
For the LINK Master, do not exceed the ‘DURAHEAT’ power supply
values mentioned in the installation chapter. (
→
4.1.)
5. Filter pump
The self-priming DURAFLOW Inverter filter pump is fully controlled by the
LINK Master. Multi-Brand filter pumps are also supported, however be aware
that the available LINK Master connections for Multi-Brand devices are limit-
ed and therefor give restrictions.
5.1. Installation
The LINK Master supports three types of filter pumps:
•
DURAFLOW Inverter filter pump
o
Providing full variable filter speeds
•
Multi-Brand ON/OFF filter pump
o
Always running at one speed
•
Multi-Brand Inverter filter pump
o
Running at two fixed speeds NORMAL and BOOST, variable
speeds are not supported.
It is essential to first read the manual of the DURAFLOW Inverter filter pump
carefully, before working on the electrical connections with the LINK Mas-
ter.
5.1.1. DURAFLOW Inverter filter pump wiring instructions
Ensure the advised cable sections are adhered to when connecting the DU-
RAFLOW Inverter filter pump.
The designated connection terminal blocks need to be used to connect the
DURAFLOW Inverter filter pump to the LINK Master. Ensure the screws are
firmly tightened!
DLM-600 filter pump wiring
