11
LINK M
ASTER
10
1.3.1. Controller keypad
Manual button
Filling button
Aux button
Cover button
Used for switching between
manual and automatic
mode.
Used for enabling/dis-
abling the filling mode of
the pool.
Used for turning Auxiliary port
on or off.
This button will open/
close the pool cover
DuraLink button
Heating button
Sensors button
Relay A button
Used for enabling/disabling
discovery mode.
Used for turning the heat
pump on or off.
Used for turning the sensors
on or off.
(By default this led is on.)
Used for activating your
Relay A function. (
→
2.2.3.)
Cleaning button
Filtration button
Lights button
Relay B button
Used for enabling/disabling
cleaning mode for the pool
Used for turning the filtra-
tion pump on or off.
Used for turning the pool lights
on or off.
Used for activating your
Relay B function (
→
2.2.3.)
1.3.2. Gateway keypad
On/Off button
Cloud LED
This button will turn on/off
the gateway.
This led will be on if
your LINK Master has an
internet connection.
DuraLink LED
Direct Wifi button
This led will blink if it
receives a wireless DuraLink
message.
This button will enable
an access point on your
gateway.
Owner button
This button is used to
become owner in the Dura-
Cloud App (
→
2.2.2.2.)
2. LINK Master
2.1. Installation
2.1.1. Mechanical installation
2.1.1.1. Positioning
Important guidelines to observe when choosing the correct location for
installing the LINK Master.
-
The antenna needs to be attached on the top right of the
LINK Master
-
The LINK Master cabinet needs to be mounted vertically and
permanently on a solid wall with sufficient bearing capacity.
-
Respect a free space around the LINK Master cabinet for
unobstructed airflow. (see drawing below)
300 mm
300 mm
DLM-600
