29
LINK M
ASTER
28
2.3.1.2. Gateway keypad
On/Off button
Cloud LED
This button will turn on/off
the gateway.
This led will be on if your
LINK Master
DuraLink LED
Direct Wifi button
This led will blink if it
receives a wireless DuraLink
message.
This button will enable
an access point on your
gateway.
Owner button
This button is used to
become owner in the app
(ref. become owner)
2.3.2. Discovery/Pairing mode
The Pairing/Discovery mode is used to connect House of DURATECH devic-
es with the LINK Master. The LINK Master will be able to pair with all devices
part of the DuraLink
TM
connected product range.
Enabling pairing/discovery mode:
This mode is enabled by pressing the Duralink button on the LINK Master
controller keypad. The pairing mode will be active for 15 minutes,
All the devices are powered off when entering the pairing mode.
The device pairing can be initiated by pressing on the device button on the
keypad. See the corresponding chapters in this manual to pair with a DURA-
HEAT Heat pump/DURAFLOW Filter pump/DURACOVER Cover/...
This pairing mode is also used to pair remote controls (e.g. LINK Touch
2.2.6. ).
The bottom row LEDs indicate if a device is successfully paired to the LINK
Master:
They indicate the following:
•
OFF: no DuraLink
TM
device connected to the LINK Master
•
ON: DuraLink
TM
device connected to the LINK Master
•
SLOW BLINK: Pairing in progress
•
3 TIMES FAST BLINK: Pairing succeeded
Multi-Brand devices are connected manually which is describe in the chap-
ters for each individual device.
