G 3800 X036 Operation Manual
August 2006
100
© 2006 Carlo Gavazzi Industri A/S. All rights reserved
6.5.4. Time-based logging of Multiplexed Analog data
The set-up for the logging of Multiplexed Analog data is performed in the menu "Mux Analog Log Set-up". A
table showing the Mux Analog addresses available (as defined in the menu "Counter and Mux Analog Setup")
is used for selecting the Mux Analog addresses to be logged, and for entering text descriptions, scaling for
these analog signals and engineering units. Also, the Log Time Interval for Mux Analog signals is defined in
this menu.
A Mux Analog address is selected for logging by double-clicking on it with the mouse. The color of the
associated field will then change to Cyan, and this indicates that the parameters entered under "Description",
"Range lo", "Range Hi" and "Unit of measure" will now be assigned to this Mux Analog address. The color of
the field turns green when another menu or Mux Analog address is selected, to indicate that the Mux Analog
address has now been configured for logging. To change a parameter for a Mux Analog address, click on the
associated green field and it will change color to cyan to indicate that the parameters shown belongs to this
Mux Analog address and that it is ready for changes.
To disable logging for a Mux Analog address, double-click on the associated green field.
Menu Item:
Explanation:
Unit of measure
Defines the unit of measure for the Counter. If eg an Energy-
meter with 640 pulses/kWh is used, then the “kWh” must be
entered to get the correct reading from the Dupline-online data
base.
Log interval
Defines the time interval between Counter log Records.
Date
Only relevant when a Counter is logged on a monthly basis.
Defines the day of the month the Log Record shall be made.
Hour and Minute
Only relevant when an Analink signal is logged on a daily basis.
Defines the time of the day the Log Record shall be made.
