© 2006 Carlo Gavazzi Industri A/S. All rights reserved
75
G 3800 X036 Operation Manual
August 2006
Parameter
Description
Roller blind master
Operation mode
The setting determines whether the roller blinds are started simultaneously or
sequentially. With the setting “Sequentially”, the roller blinds start and stop
successively at 1 second intervals. This time interval is also observed in con-
nection with change of direction or tilting blind (Reverse Up time). This time
interval does not affect the set roll time.
Roll time
The roll time determines for how long the roller blinds must run. This roll time
overrides the roll time set in the Decentral up-down roller blind control.
Reverse Up time
The Reverse Up time determines the time in seconds for which the roller blinds
must run in the opposite direction after expiry of the roll time. Applies to tilting
blinds.
Note
: The Controller only executes the Reversing function in decentral roller
blind controls in which the option adjustment of “Tilting blinds” has been acti-
vated.
Parameters
