© 2006 Carlo Gavazzi Industri A/S. All rights reserved
41
• Function: Setting up various light control functions
• Application: Automatic light functions depending of any combination including Motion/Proximity
switch, Lux meters and Real-time switching, still having the possibility for Manual control.
• Complex functions without the need for logic programming.
• Channel efficient, all function integrated in the same object.
• Manual control by Transmit on same address.
2.3.4. Light functions
Description:
The Light function serves a number of selections to create various control options.
The Light functions are pre-programmed and take up just one channel, and its functions are
performed from the address input signal, to the output signal on the same address.
The object may refer to other addresses to include information from a motion/Proximity Detector and a Light
Sensor.
Parameter
Description
Motion/Proximity Detector
Select this to include a Motion detector in the Light Function
When selected the entries to setup the Motion detector appear.
Net No / Address
Enter the address, from where the object are to fetch
the Motion/Proximity Detector’s input signal.
Hour,Minute,Seconds
The off-delay associated to the Motion detector
Light Sensor
Select this to include a Light sensor in the Light Function
When selected the entries to setup the Light Sensor appears.
Net No / Address
Enter the address from where the object is to fetch
the Light-sensors AnaLink value.
Include Real time clock
Select this to include Real-time switching
When selected the entries to setup the Real-time switching appears.
Switch On/ Switch Off
The time of day where the on/off-switching is to take place
Days of week
Select the days of the week or holiday, where selected on/off switching takes place.
G 3800 X036 Operation Manual
August 2006
