G 3800 X036 Operation Manual
August 2006
40
© 2006 Carlo Gavazzi Industri A/S. All rights reserved
Combinations of
On by
Off By
Dimmer functions
Manual and activation of the
Either Manual or by elapse
Motion detector
of the Motion detector time
The switch and the Motion detector are located in the same room. The Manual activation switches on
or off the function of the Motion detector.
Note: When controlled by Motion detector, the scenarios are still operational.
The Motion detector also operates on the various light scenarios. The scenario "All off" will turn off the
Manuel switch to prevent the dimmer to turn on by the Motion-detector.
To ensure correct operation of the Dimmer’s, you should not operate the Dimmer-control addresses
directly or through Master functions or logic, as this may disturb the function of the Dimmer when con-
trolled by Motion detector.
Step 2
Select a Scenario
Once a set of Dimmer controls is given, the Dimmer function
function
"Dimmer scenario" is available.
Step 3
Now select which dimmers (lamps) are to be controlled by the scenario.
The symbol
lit lamp, indicates an included dimmer.
The symbol
indicates a dimmer not included.
The symbols
show the Dimmer controls
By selecting the lamp symbol in the table, its corresponding control channels
are marked as well.
Note: Various dimmers may be controlled by the same Scenario.
Note: If several dimmers are to be controlled individually, with various scenar-
ios, then different set of control channels must be set up.
Note: only Dimmers of the same type (2*230W or 1x600W) are shown.
Finally select the actual scenario to be performed.
