3
Owner’s Manual for Duke Flexbake 5
TM
Proof and Bake Oven with WiFi Connectivity
Throughout this manual, you will find the following safety words and symbols that signify
important safety issues with regards to operating or maintaining the equipment.
WARNING
Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
CAUTION
Indicates Important Information
Indicates electrical shock hazard which, if not avoided, could result
in death or serious injury and/or equipment damage.
Indicates hot surface which, if not avoided, could result in minor or
moderate injury.
Indicates hot surface which, if not avoided, could result in minor or
moderate injury. Specifically, risk of burn from heating elements.
Indicates rotating fan blade hazard which, if not avoided, could
result in minor or moderate injury.
Electrical shock hazard. Do not wash with water jet or hose.
CAUTION
In addition to the warnings and cautions in this manual, use the following guidelines for
safe operation of the unit.
• Read all instructions before using equipment.
• For your safety, the equipment is furnished with a properly grounded cord connector. Do
not attempt to remove or disconnect the grounded connector.
• Install or locate the equipment only for its intended use as described in this manual.
• This equipment is intended to proof and bake bread and other bakery foods for the
purpose of human consumption. No other use for this appliance is authorized.
• Do not use corrosive chemicals in this equipment.
• Do not use caustic cleaners, acids, ammonia products or abrasive cleaners or abrasive
cloths. These can damage the stainless steel and plastic surfaces.
• Do not operate this equipment if it has a damaged cord or plug, if it is not working
properly, or if it has been damaged or dropped.
• This equipment shall be serviced by qualified personnel only. Contact the nearest Duke
authorized service facility for adjustment or repair.
• Do not block or cover any openings on the unit.
• A minimum clearance of 6” (152.4 mm) from the top of the unit to the ceiling must be
provided.
• Properly rated all poles mains protection and earthing compliance with local electric
codes are required for safe operation of this unit.
• Secure unit to a wall with the wall mounting brackets provided to prevent tipping.
IMPORTANT SAFETY INSTRUCTIONS
