18
Owner's Manual for Duke Flexbake 5
TM
Proof and Bake Oven with WiFi Connectivity
OPERATING INSTRUCTIONS - continued
STEP 3
Once the preheat or conditioning cycle is complete,
the display will change to the Oven Recipe Ready to Start
screen. An audible alarm will sound (3 triple chirps) when the
oven reaches the ready state.
Figure: Oven Recipe Ready to Start
STEP 4
Load the oven with dough and touch the start timer
button. The remaining time will be displayed in the
button area and the progress bar will change to visually show
elapsed and remaining bake time.
NOTE: You can cancel an active timer with press and hold for
2 to 3 seconds on the count down timer.
Figure: Oven Count Down Timer
STEP 6
If a bake with cheese recipe was selected, at 2:00
minutes remaining in the proof cycle an alarm will beep (triple
beeps) to alert the operator to add cheese. Add Cheese Now
will be displayed. Touch the Add Cheese Now message or open
the door to cancel the alarm.
Figure: Cheese Time Alarm
STEP 7
At 20 min. remaining in the bake, a bake complete in
20 min. message and alarm will alert the operator to retard the
next load of bread for optimized baking throughput.
Figure: Retard Next Load Alarm
STEP 5
With 4 minutes remaining in the proof cycle, a pop-up
message will be displayed with an option to add +5 minutes to
achieve desired bread size.
Figure: 5 Minute Pop-up
STEP 8
When the bake is complete, an alarm will beep to alert
the operator. Touch the Timer
or open the oven door
to cancel the alarm.
NOTE: At 2:00 minutes remaining in the bake, an alarm will
beep to alert the operator.
Figure: Oven Bake Complete Alarm
STEP 9
You can add 1 minute to baking time by touching the
button adjacent to the count down timer. This can be done
at any time during the bake or at the end of a baking cycle.
You must add time in 1 minute increments.
STEP 10
Adjust the time, if necessary, depending on type of
dough and desired results.
STEP 11
If the next bake is a Proof and Bake recipe, select the
Cool Down cycle to rapidly cool the oven.
STEP 12
Once the Cool Down cycle is completed, select the
desired recipe (i.e.
FULL BAKE
) to condition the oven for the
bake.
STEP 13
When the oven is ready, the Oven Recipe Ready to
start screen will be displayed.
