19
Owner’s Manual for Duke Flexbake 5
TM
Proof and Bake Oven with WiFi Connectivity
OPERATING INSTRUCTIONS - continued
BAKING TIPS
•
Always select the oven recipe and allow preheat time prior to loading product. Only load when the Oven Recipe Ready to
Start Timers screen is displayed. Load the oven with ten pans of dough and touch the start button.
•
If the bread color is uneven, reduce temperature and extend bake time in recipe (see Programming Controls).
•
If the bread is too dark, reduce the bake time in the recipe (see Programming Controls). If the bake time is reduced and the
bread is still too dark, reduce the temperature by 15° F (10° C) and bake longer.
•
When baking partial loads, start loading on the center shelf and work up and down from the center.
•
Opening oven door allows heat to escape. Under normal conditions, quick loading and unloading will not be a problem. If
door is left open too long, oven performance will be affected.
CARE AND CLEANING
WARNING
OVEN INTERIOR AND RACKS ARE VERY HOT AND COOL SLOWLY.
ALLOW TO COOL BEFORE HANDLING.
CAUTION
ELECTRICAL SHOCK HAZARD:
DO NOT WASH WITH WATER JET OR HOSE.
CAUTION
DO NOT USE OVEN CLEANERS, CAUSTIC CLEANERS, DEGREASERS, ACIDS, AMMONIA PRODUCTS,
ABRASIVE CLEANERS, STEEL WOOL, OR ABRASIVE PADS CONTAINING IRON. THESE CAN DAMAGE
THE STAINLESS STEEL, DOOR GASKETS, PLASTIC SURFACES AND SENSORS.
DAILY CLEANING INSTRUCTIONS
1. Pour a large cup of hot water through the cavity bottom
drain to flush any bread crumbs or seasoning from drain
line.
2. Empty drain water pan.
3. Clean Drip Tray with clean damp cloth.
4. Clean stainless steel exterior with stainless steel cleaner or
polish, or with hot soapy water followed by a clean water
rinse.
5. Clean oven doors with a glass cleaner.
6. Clean oven interiors with a damp cloth. If heavy soil areas
exist clean with hot soapy water and follow with clean
damp cloth.
WEEKLY CLEANING INSTRUCTIONS
1. The Cool-Touch door has two window panes. The inner
window can be easily separated from the outer window
for cleaning. This is achieved by unlatching two clips and
rotating the inner window on its hinges. After cleaning,
the inner window frame is easily clipped to the outer
window by squeezing the two windows together. For
additional detail refer to "Cool- Touch Door Information"
section of this manual.
2. Inspect oven door gaskets for cuts, tears or any other
damage. Refer to the section on "Door Adjustments and
Gasket Maintenance" for directions.
MONTHLY CLEANING INSTRUCTIONS
1. Check door screws for tightness.
2. Check the door gasket seal on the oven for leaks.
Refer to the section on "Door Adjustments and Gasket
Maintenance" for directions.