20
Owner's Manual for Duke Flexbake 5
TM
Proof and Bake Oven with WiFi Connectivity
DOOR ADJUSTMENT & GASKET MAINTENANCE
Note: Reversing oven door requires two (2)
people.
WARNING
Step 1
Open oven door. Remove the lower hinge pin
retaining ring (FIG 1).
DETAIL A
SCALE 1 : 4
FIG 1
Step 2
. Using an assistant to support the door, remove the
hinge pin and the door from the oven (Fig. 2).
NOTE: Take care to not lose upper/lower bushings.
FIG 2
Step 3
. Remove the six pan head screws on the front of the
oven to expose the hinge screw holes for the other swing
direction (Fig. 3).
FIG 3
Step 4
. Remove the six screws that hold the upper and lower
hinges to the front of the oven. Move the hinges to the other
side and reattach using these hex head screws. (FIG 3 and 4)
NOTE: The hinge pin hole in each hinge should be toward
the outer edge of the oven. Leave these loose enough for
the hinge to float to ease assembly and alignment.
FIG 4
Step 5
. Use the six pan head screws removed in step 3 above
to fill the unused hinge screw holes on the front of the oven.
Step 6
. Remove the latch strike and locking jam nut from the
front of the oven and move it to the other side. Remove the
M8 pan head screw from the other side (opposite the strike) to
fill the original strike screw hole.
NOTE: To remove the strike,
first loosen the locking jam nut. (FIG 3 and 4)
REVERSING OVEN DOOR SWING DIRECTION
