![background image](http://html1.mh-extra.com/html/ducati/monster-s4rs/monster-s4rs_owners-manual_2537699107.webp)
E
32
Adjusting the rear ride height
(fig. 27-fig. 28-fig. 29)
The standard ride height setting is the result of tests carried
out in a wide variety of conditions by our technical staff.
Modifying the rear ride height is a very critical operation,
and can be dangerous if carried out by untrained persons.
Before changing the standard setting, measure the
reference value (H, fig. 27).
The rider can adjust the rear ride height to suit his/her
needs by changing the working position of the rear
shock absorber.
To alter the eye to eye length of the tie-rod (1), slacken the
locknuts (3).
Notes
Note that the lower nut (3) has a left-hand thread.
Rotate the tie-rod (2) with an open-ended wrench.
Once the tie-rod length is adjusted correctly, tighten
the nuts (3) to 25 Nm.
Warning
The length of the tie-rod (2) between the centres
of the two eyes (1) should not exceed 272 mm.
fig. 27
H
fig. 28
1
3
2
2
3
1
Summary of Contents for Monster S4RS
