Draytek Vigor2910 Series User Manual Download

Page: 90 / 269

Vigor2910 Series User’s Guide

Check to enable the
Filter Rule

Check this box to enable the filter rule.

Comments

Enter filter set comments/description. Maximum length is 14-
character long.

Index (1-15)

Set the PCs on LAN to work at certain time interval only. You may
choose up to 4 schedules out of the 15 schedules pre-defined in

Applications >> Schedule

setup. The default setting of this filed is

blank and the function will always work.

Direction

Set the direction of packet flow (LAN->WAN/WAN->LAN). It is
for

Data Filter

only. For the

Call Filter

, this setting is not

available since

Call Filter

is only applied to outgoing traffic.

Source/Destination IP

Click

Edit

to access into the following dialog to choose the

source/destination IP or IP ranges.

To set the IP address manually, please choose

Any Address/Single

Summary of Contents for Vigor2910 Series














































































































































































































































































Search results

Summary of Contents for Vigor2910 Series

Reviews:

Related manuals for Vigor2910 Series

Brands by name

Popular brands

Draytek Vigor2910 Series, User Manual

Search results

Summary of Contents for Vigor2910 Series

Reviews:

Related manuals for Vigor2910 Series

Brands by name

Popular brands