Draytek Vigor2910 Series, User Manual

Page: 42 / 269

Vigor2910 Series User’s Guide 32
D
D
e
e
t
t
a
a
i
i
l
l
s
s
P
P
a
a
g
g
e
e
f
f
o
o
r
r
P
P
P
P
P
P
o
o
E
E
To use PPPoE as the accessing protocol of the internet, please choose Internet Access from
WAN menu. Then, select PPPoE mode for WAN2. The following web page will be shown.
PPPoE Client Mode Click Enable for activating this function. If you click Disable , this
function will be closed and all the settings that you adjusted in this
page will be invalid.
ISP Access Setup Enter your allocated username, password and authentication
parameters according to the information provided by your ISP. If
you want to connect to Internet all the time, you can check
Always
On .
Username – Type in the username provided by ISP in this field.
Password – Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup - You can type in four sets of time
schedule for your request. All the schedules can be set previously
in
Application – Schedule web page and you can use the number
that you have set in that web page.
ISDN Dial Backup
Setup This setting is available for the routers supporting ISDN
function only. Before utilizing the ISDN dial backup feature,
you must create a dial backup profile first. Please click
Internet
Access Setup > Dialing to a Single ISP to enter the backup
profile.
This setting is available for i model only.
Due to the absence of the ISDN interface in some models, the
ISDN dial backup feature and its associated setup options are not
available to them. Please refer to the previous part for further
information.