Draytek Vigor130, User Manual

Page: 98 / 288

Vigor130 Series User’s Guide 88
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Name Type a name for this profile. Maximum 15 characters are
allowed.
Interface Choose a proper interface.
For example, the Direction setting in Edit Filter Rule will
ask you specify IP or IP range for WAN or LAN or any IP
address. If you choose LAN as the
Interface here, and
choose LAN as the direction setting in Edit Filter Rule ,
then all the IP addresses specified with LAN interface will
be opened for you to choose in
Edit Filter Rule page.
Address Type Determine the address type for the IP address.
Select
Single Address if this object contains one IP address
only.
Select Range Address if this object contains several IPs
within a range.
Select Subnet Address if this object contains one subnet
for IP address.
Select Any Address if this object contains any IP address.
Select Mac Address if this object contains Mac address.
MAC Address
Type the MAC address of the network card which will be
controlled.
Start IP Address Type the start IP address for Single Address type.
End IP Address Type the end IP address if the Range Address type is
selected.
Subnet Mask Type the subnet mask if the Subnet Address type is
selected.
Invert Selection If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
3. After finishing all the settings here, please click OK to save the configuration. Below is
an example of IP objects settings.