manualshive.com logo in svg

Draytek Vigor130, User Manual

Share
Download
Draytek Vigor130 User Manual Download Page 139

 

Vigor130 Series User’s Guide 

129

Control 

checkbox to allow system administrators to login from the 
Internet. There are several servers provided by the system to 
allow you managing the modem from Internet. Check the 
box(es) to specify.

 

Enable PING from the Internet 

- 

Check the checkbox 

to enable all PING packets from the Internet. For security 
issue, this function is disabled by default.

 

Access List 

You could specify that the system administrator can only 
login from a specific host or network defined in the list. A 
maximum of three IPs/subnet masks is allowed. 

IPv6 Address /Prefix Length

- Indicate the IP address(es) 

allowed to login to the modem.

 

Summary of Contents for Vigor130

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands