manualshive.com logo in svg

Draytek Vigor130, User Manual

Share
Download
Draytek Vigor130 User Manual Download Page 61

 

Vigor130 Series User’s Guide 

51

 

Start IP Address:

 Enter a value of the IP address pool 

for the DHCP server to start with when issuing IP 
addresses. If the 2nd IP address of your modem is 
220.135.240.1, the starting IP address must be 
220.135.240.2 or greater, but smaller than 
220.135.240.254. 

 

IP Pool Counts:

 Enter the number of IP addresses in 

the pool. The maximum is 10. For example, if you 
type 3 and the 2nd IP address of your modem is 
220.135.240.1, the range of IP address by the DHCP 
server will be from 220.135.240.2 to 220.135.240.11. 

 

MAC Address: 

Enter the MAC Address of the host 

one by one and click 

Add

 to create a list of hosts to be 

assigned, deleted or edited IP address from above 
pool. Set a list of MAC Address for 2

nd

 DHCP server 

will help modem to assign the correct IP address of the 
correct subnet to the correct host. So those hosts in 2

nd

 

subnet won’t get an IP address belonging to 1

st

 subnet.

RIP Protocol Control,   

Disable - 

deactivate the RIP protocol. It will lead to a 

stoppage of the exchange of routing information between 
modems. (Default) 

 

1st Subnet - 

Select the modem to change the RIP 

information of the 1st subnet with neighboring 
modems.

 

 

2nd Subnet - 

Select the modem to change the RIP 

information of the 2nd subnet with neighboring 
modems. 

DHCP Server 
Configuration 

DHCP stands for Dynamic Host Configuration Protocol. 
The modem by factory default acts a DHCP server for your 
network so it automatically dispatch related IP settings to 
any local user configured as a DHCP client. It is highly 
recommended that you leave the modem enabled as a 
DHCP server if you do not have a DHCP server for your 

Summary of Contents for Vigor130

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands