Vigor130 Series User’s Guide
92
Available settings are explained as follows:
Item Description
Name
Type a name for this profile. Maximum 15 characters are
allowed.
Address Type
Determine the address type for the IPv6 address.
Select
Single Address
if this object contains one IPv6
address only.
Select
Range Address
if this object contains several IPv6s
within a range.
Select
Subnet Address
if this object contains one subnet
for IPv6 address.
Select
Any Address
if this object contains any IPv6
address.
Select
Mac Address
if this object contains Mac address.
Mac Address
Type the MAC address of the network card which will be
controlled.
Start IP Address
Type the start IP address for Single Address type.
End IP Address
Type the end IP address if the Range Address type is
selected.
Prefix Len
Type the number (e.g., 64) for the prefix length of IPv6
address.
Invert Selection
If it is checked, all the IPv6 addresses except the ones listed
above will be applied later while it is chosen.
3.
After finishing all the settings, please click
OK
to save the configuration.
Summary of Contents for Vigor130
