●
The designation of the bearings is shown in the
diagram.
Connecting the Cicero EM ceiling version
1
Swing supporting flap upwards!
2
Press key until DVE reaches lower limit stop.
3
Press key to release bearings.
The DVE can be pivoted into the required position.
Single-arm DVE units:
Upper key for ceiling bearing
Lower key for end bearing
Two-armed DVE units with extension arm:
Upper key for ceiling and end bearings
Lower key for intermediate bearing
4
Swing supporting flap down again.
The DVE can no longer be operated via its own
keypad.
●
Plug the mains connector of the Cicero EM into the
socket on the DVE.
●
Plug the pipeline probes of the Cicero EM into the
corresponding outlets on the DVE.
5
Move Cicero right up to the mount on the DVE.
186
2
3
1
Description
Operation of the ceiling version
4
5
Ceiling bearing
Intermediate bearing
End bearing
21929278
22029278
22129278
22229278
22329278
