49
NOTE:
The function INTERFACE 2 is an option and not
supported by the
Digox 6
.
The transfer rates of the PC interface must be the
same as the transfer rate of the
Digox 6
.
The transfer rate of the PC is set using the
DigoxWin program (refer to section 5.3.2.2).
8.3.3 Setting the clock
In the menu of menu level 2, press
and
highlight the menu item SET CLOCK. Press
.
Figure: 8.20
Mode of operation
Press
to activate the setting mode, 24 is
highlighted. Press
to set the 12 h display and
to confirm your selection.
Change time and date
Highlight the menu item and confirm with
. The
setting mode is active. Changes are made using
the cursor keys. Use
to confirm.
After setting, highlight the menu item RETURN
and confirm with
.
8.3.4 Polling the identification number
In the menu of menu level 2, use
to highlight
the menu item IDENTIFICATION and press
.
Figure: 8.21
The 12-digit IDENT number of your unit is
displayed. Use
to return to the menu of menu
level 2.
8.3.5 Enabling options
In the menu of menu level 2, use
to highlight
the menu item ACTIVE OPTIONS and press
.
Figure: 8.22
This menu item allows you to use a code to
extend the memory of the data logger from 1,000
to 3,000 values.
NOTE
Enabling the extended data logger is done by our
maintenance service.
Summary of Contents for Digox 6
