Dr.Thiedig Digox 6, Operating Manual

Page: 31 / 62

31
Reading out the measuring values
through DigoxWin
1. Install the DigoxWin program on the PC, see
section 5.4.
2. Use the supplied interface cable to connect
the Digox 6 with a free serial PC interface
(e.g. COM1).
NOTE:
The transfer rates [9600 Baud] of the Digox 6 and
DigoxWin program must be identical:
3. Start DigoxWin and open the menu item
COMMUNICATION to select the entry READ
OUT DATA LOGGER. Now the measuring
values will be read out from the data logger of
the Digox 6.
NOTE:
For using DigoxWin, please read section 5.4.
Displaying measuring values
(only measuring point data logger)
1. Mark the menu item DISPLAY MEASURING
VALUES in the menu
DATA LOGGER//MEASURING POINT.
2. Press to confirm.
Figure: 5.3
5.2.4 Deleting measure values
1. Mark the menu item DELETE in the menu
DATA LOGGER//CONTINUOUS and confirm
with .
Figure 5.4
2. Quit the menu by pressing .
NOTE:
After confirming the deletion, the display will
remain unchanged for about 30 seconds and then
return to the menu.