DP Pumps Hydro-Unit Utility Line F, Installation & Operating Manual

Page: 78 / 96

78
/
96
Parameter Description Value range and dependencies Factory setting Access level Read Access level Write Re-start
required
2-5-3-3-2 Source Flow estimation (VFD) - Everybody Service -
2-5-3-3-3 Time of stagnation 0 … 7 d 24 h Everybody Service -
2-5-3-3-4 Response Message Message Everybody Service -
Flushing with check run
2-5-3-4 Forced flushing - - - - -
2-5-3-4-1 Forced flushing Disabled Disabled Everybody Service -
Enabled
2-5-3-5 Flushing function - - Everybody Nobody -
2-5-3-5-2 Minimum flushing time 0 … maximum flushing time 10 s Everybody Service -
2-5-3-5-3 Maximum flushing time Minimum flushing time … 999 s 60 s Everybody Service -
2-5-3-5-4 Maximum flushing attempts in 24
hours 0 … 10 5 Everybody Service -
2-5-3-5-5 Stop temperature for flushing 0 … maximum temperature 20 °C Everybody Service -
2-5-3-5-6 Flushing time for each pump 0 … 999 s 10 s Everybody Service -
2-5-4 Emergency power operation - - Everybody Nobody -
2-5-4-2 Maximum system load 1 … maximum number of pumps 1 Everybody Service -
2-5-4-3 Stop delay enabled/disabled Disabled Enabled Everybody Service -
Enabled
2-5-5 Discharge pressure monitoring - - Everybody Nobody -
2-5-5-1 High pressure alarm - - Everybody Nobody -
2-5-5-1-1 Maximum discharge pressure 0 … maximum pump head Maximum pump
discharge head Everybody Service -
2-5-5-1-2 Delay time 0 … 60 s 10 s Everybody Service -
2-5-5-1-3 Selection of pump response Message Message Everybody Service -
Message and stop all pumps
2-5-5-2 Low pressure alarm - - Everybody Nobody -
2-5-5-2-1 Minimum discharge pressure 0 … maximum pump head 0 Everybody Service -
2-5-5-2-2 Delay time 0 … 60 s 10 s Everybody Service -
2-5-5-2-3 Selection of pump response Message Message Everybody Service -
Message and stop all pumps
2-5-6 Pipe filling function - - - - -
2-5-6-1 Pipe filling function Disabled Disabled Everybody Service -
Enabled
2-5-6-2 Deviation from set-point 0 … set-point 10 Everybody Service -