DP Pumps Hydro-Unit Utility Line F, Installation & Operating Manual

Page: 77 / 96

77
/
96
Parameter Description Value range and dependencies Factory setting Access level Read Access level Write Re-start
required
2-5-1-3-2 Minimum suction-side pressure for
reset Minimum suction-side pressure for stop …
Maximum pressure sensor range 1.5 bar Everybody Service -
2-5-1-6 Flow switch - - - - -
2-5-1-6-2 Discharge pressure deviation 0 …10 bar 1 bar Everybody Service -
2-5-2 Leakage detection - - - - -
2-5-2-1 Leakage detection Disabled Disabled Everybody Service -
Enabled
2-5-2-2 Source Water detection integrated Water-detection on-
board Everybody Service -
Leakage-detection by external device
2-5-2-4 Position Leakage of pump system Leakage of pump-
system Everybody Service -
Overflow of tank
2-5-2-5 Response Message only Message only Everybody Service -
Message and stop all pumps
Message and close inlet valve
Message, close inlet valve and stop pumps
2-5-2-6 Delay time leakage detection 0 … 99 s 10 s Everybody Service -
2-5-2-7 Delay time reset 0 … 99 s 2 s Everybody Service -
2-5-3 Hygienic functions - - - - -
2-5-3-1 General - - - - -
2-5-3-1-1 Hygienic functions Disabled Disabled Everybody Service -
Enabled
2-5-3-2 Temperature monitoring - - - - -
2-5-3-2-1 Temperature monitoring Disabled Disabled Everybody Service -
Enabled
2-5-3-2-2 Maximum temperature 0 … 70 °C 25 °C Everybody Service -
2-5-3-2-3 Minimum temperature 0 … 70 °C 5 °C Everybody Service -
2-5-3-2-4 Response Message Message Everybody Service -
Flushing
2-5-3-3 Water stagnation monitoring - - - - -
2-5-3-3-1 Water stagnation monitoring Disabled Disabled Everybody Service -
Enabled
2-5-3-3-2 Source Flow sensor - Everybody Service -
Flow switch