44 / 96
7.2.3 Locking/unlocking the screen
Table 17:
Symbols for locking/unlocking the screen
Symbol
Description
Screen settings locked
No settings can be made but information can still be displayed, e.g. pump load.
Error messages are limited to the selected part.
Screen settings unlocked
Changes can be made on the screen.
7.2.4 Operating status of the pump
The following symbols are displayed per pump set in the system. E.g. for a system with four
pump sets, P1, P2, P3 and P4 are displayed.
1
2
3
4
5
6
Fig. 18:
Operating status of pump set P2
Table 18:
Pump operating status symbols
Position
Refers to
Description
1
Pump set in the system
Symbols for a specific pump set (in this example pump set 2)
2
Active messages
One or more warning messages or alert messages are active for pump set 2.
3
Pump set running
Indicates whether the pump set is currently running. This symbol is extinguishes
when the pump set has been stopped or is in idle state.
4
Automatic mode
The pump set is started up and stopped via the control unit (F system) or via a
frequency inverter (VC and SVP systems).
5
Manual OFF
Pump start-up is locked. If a pump set is running, it will be stopped.
6
Manual ON
The pump set is started up manually.
In the case of an F system, the pump is started up. In the case of a VC or
SVP system, the pump starts running at a fixed frequency (fixed speed). The
fixed frequency can be configured.
7.2.5 Information on the system
1
2
3
4
5
6
7
Fig. 19:
Information on the system
Summary of Contents for Hydro-Unit Utility Line F
