DP Pumps Hydro-Unit Utility Line F, Installation & Operating Manual

Page: 72 / 96

72
/
96
Parameter Description Value range and dependencies Factory setting Access level Read Access level Write Re-start
required
2-1-3 Alternative setpoint 0 … 99 bar 2.5 bar Everybody Customer -
2-1-4 Alternative setpoint selection Disabled Disabled Everybody Customer -
Time enabled
Digital input enabled
2-1-5 Alternative set-point start time
(hours) 0 … 24 h 0 Everybody Customer -
2-1-6 Alternative set-point start time
(minutes) 0 … 60 min 0 Everybody Customer -
2-1-7 Alternative set-point stop time
(hours) 0 … 24 h 0 Everybody Customer -
2-1-8 Alternative set-point stop time
(minutes) 0 … 60 min 0 Everybody Customer -
2-1-9 Additional setpoint increase 0 … 1 bar 0.3 bar Everybody Customer -
2-1-10 Minimum set-point 0 … 99 bar 0 bar Everybody Service -
2-1-11 Maximum set-point 0 … 99 bar 99 bar Everybody Service -
10.2.2.2 Pump operating mode
Table 30: Pump operating mode parameters
Parameter Description Value range and dependencies Factory setting Access level Read Access level Write Re-start
required
2-2 Pumps - - Everybody Nobody -
2-2-1 Pump operating mode - - Everybody Nobody -
2-2-1-1 Pump 1 Automatic Manual-Off Everybody Display/Customer -
Manual-Off
Manual-On
2-2-1-2 Pump 2 Automatic Manual-Off Everybody Display/Customer -
Manual-Off
Manual-On
2-2-1-3 Pump 3 Automatic Manual-Off Everybody Display/Customer -
Manual-Off
Manual-On
2-2-1-4 Pump 4 Automatic Manual-Off Everybody Display/Customer -
Manual-Off