Dovre ASTRO4GA - P, Installation Instructions & Operating Manual

Page: 50 / 162

Cleaning and other regularly
maintenance
Do not clean the appliance when it is still warm.
Clean the exterior of the appliance with a dry lint-free
cloth.
Cleaning the glass
Dirt clings less easily to well-cleaned glass. Proceed as
follows:
1. Remove dust and loose soot with a dry cloth.
2. Clean the glass with stove glass cleaner:
a. Apply stove glass cleaner to a kitchen sponge,
rub down the entire glass surface and give the
cleaning agent time to react.
b. Remove the dirt with a moist cloth or kitchen tis-
sue.
3. Clean the glass again with a normal glass cleaning
product.
4. Rub the glass clean with a dry cloth or kitchen tissue.
Do not use abrasive or aggressive products to clean
the glass.
Wear household gloves to protect your hands.
If the glass in the appliance is broken or cracked,
it must be replaced before you can use appliance
again.
Ensure that no stove glass cleaner runs between
the glass and the cast-iron door.
Use the instructions above to clean the black mir-
ror panels on the inside of the stove too.
Touching-up the paint finish
Small areas of damaged paint finish can be touched-up
with a spray can of special heat-resistant paint, available
from your supplier.
Checking the seal
Check whether the glass pane sealing rope is still in good
condition and working well. The sealing rope is subject to
wear and will need to be replaced in time.
Spare parts for Astro4GA(P)
Description Part number
Remote control with thermostat 03.06113.000
Imitation wood blocks 03.31226.000
Glass cover seal black 03.26433.000
Burner unit 02.12050.000
Thermocouple 03.68216.000
Electrode pilot 03.23602.000
Pilot unit 03.12011.000
Ignition cable 500 mm 03.30130.000
Rear wall mirror panel 03.08375.000
Side wall mirror panel 03.08376.000
Installation plate Astro4GA 02.42026.000
Installation plate Astro4GAP 02.42030.000
20
Subject to change because of technical improvements