1. Imitation wood blocks
2. Fire basket
3. Burner unit
4. Installation plate with gas regulator
The complete wood block set consists of five
blocks of ceramic imitation wood, a bag of ash gran-
ules and a bag of incandescent filaments.
The blocks are fragile, treat them with care.
The blocks must be placed on the burner
exactly as indicated in the photos.
Follow the instructions below to place the blocks:
1. Place the first block (1) at the back in the middle of
the burner plate right in front of the back row of
holes; see next figure.
2. Now place the blocks (2) and (3) left and right on
the burner, partly support these on the fire basket;
see next figure.
3. Place the block (4) at the front in the middle of the
burner plate; see next figure.
4. Place the block (5) diagonally across the foremost
block on the right block; see next figure.
Pay attention to the notches on the back side
of the block (5) that fit in block (1).
5. Spread the ash granules in the front over the vis-
ible surface area of the burner.
Subject to change because of technical improvements
15
Summary of Contents for ASTRO4GA - P
