Troubleshooting
SECTION 06 Troubleshooting
30/54
Replacing a recovery gutter
■ Tools:
0.9 mm Allen wrench, Imaje gutter adjustment tool.
CAUTION:
The jet must be stopped.
Residual ink may pour out, take appropriate precautions.
■ Disassembly:
□ Loosen the pressure screw on the same side as the gutter to be replaced, by half a
turn.
□ Use the gutter adjustment tool to extract the gutter to be replaced.
□ Use additive to clean the port on the recovery unit.
■ Reassembly:
□ Insert the new gutter in the orifice on the recovery assembly unit and push it fully in.
■ Testing and adjustment:
□ Set the jet to "adjustment" mode.
□ Use the adjustment tool to adjust the gutter (jet in center of gutter).
□ Tighten the pressure screw moderately.
