manualshive.com logo in svg

DÖRR EcoGun 2100, Operation Manual

Share
Download
DÖRR EcoGun 2100 Operation Manual Download Page 24

3. Remove nozzle 

Ä

 8.3.5 “Dismantling the 

nozzle”.

4. Purge the spray gun quickly without the 

nozzle 

Ä

 6.6 “Rinsing”.

5. Install nozzle 

Ä

 8.3.6 “Install the nozzle”.

Install large filter

Personnel:

Operator
 + additional qualification explosion pro-
tection
 + Additional qualification high pressure

Protective equipment:

Face protection
Protective workwear
Protective gloves

Fig. 18: Install large filter

1. Insert filter (2) into the paint pipe (1).

ð

The filter projects out of the paint pipe 
by about 4mm. The filter is installed.

2. Insert spring (3).

3. Insert sleeve (4).

4. Screw material connection (5) onto the 

paint pipe (1) using a SW 17mm spanner.

Simultaneously, counter-support paint 

pipe (1) using an SW 13mm spanner.

5. Remove nozzle 

Ä

 8.3.5 “Dismantling the 

nozzle”.

6. Purge the spray gun quickly without the 

nozzle 

Ä

 6.6 “Rinsing”.

7. Install nozzle 

Ä

 8.3.6 “Install the nozzle”.

8.3.3  Remove the needle

Personnel:

Operator
 + additional qualification explosion pro-
tection
 + Additional qualification high pressure

Protective equipment:

Face protection
Protective workwear
Protective gloves

Fig. 19: Remove needle

1. Lock spray gun 

Ä

 6.5 “Secure spray 

gun.”.

2. Unscrew plug (1).

3. Pull out needle (2) with spring (6) and 

pressure disc (5) on rear part of the 

needle (4).

ð

Removal of needle is complete.

Maintenance

02/2020

EcoGun 2100 - MSG00004EN

24/52

Summary of Contents for EcoGun 2100





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands