Adjust flat jet
The horn air is mixed with the material jet via
the flat jet control.
Personnel:
Operator
+ additional qualification explosion pro-
tection
+ Additional qualification high pressure
Protective equipment:
Protective workwear
Respiratory protection device
Face protection
Use ear protection
Protective gloves
Safety boots
Perform one of the following steps:
Fig. 8: Adjust flat jet
1. Swivel lever (1) to the right.
ð
Less horn air is mixed.
2. Swivel lever (1) to the left.
ð
A lot of horn air is mixed into.
Adjust circular jet
The shaping air is mixed with the material jet
via the flat jet control.
Personnel:
Operator
+ additional qualification explosion pro-
tection
+ Additional qualification high pressure
Protective equipment:
Protective workwear
Respiratory protection device
Face protection
Use ear protection
Protective gloves
Safety boots
Perform one of the following steps:
Fig. 9: Adjust circular jet
1. Turn the adjusting screw (1) clockwise.
ð
The spray pattern becomes larger.
2. Turn the adjusting screw (1) counter-
clockwise.
ð
The spray pattern becomes smaller.
Operation
02/2020
EcoGun 2100 - MSG00004EN
14/52
