6.5
Secure spray gun.
Personnel:
Operator
+ additional qualification explosion pro-
tection
+ Additional qualification high pressure
Protective equipment:
Protective workwear
Face protection
Use ear protection
Safety boots
Protective gloves
Fig. 14: Lock spray gun
1. Purge spray gun
2. Set pump pressure to 0bar and /or switch
off pump for material pressure and com-
pressed air.
3. Drive the trigger (1) completely.
ð
The pump and hoses are relieved.
6.6
Rinsing
6.6.1 Safety recommendations
NOTICE!
Material damage due to unsuitable
rinsing agent
If the rinsing agent reacts chemically with
the components or the material, compo-
nents get damaged.
– Use only the rinsing agents that are
compatible with the components and
the material.
– Refer to safety data sheet of material
manufacturer.
6.6.2 Rinsing spray gun
NOTICE!
Material damage due to unsuitable
rinsing agent
If the rinsing agent reacts chemically with
the components or the material, compo-
nents get damaged.
– Use only the rinsing agents that are
compatible with the components and
the material.
– Refer to safety data sheet of material
manufacturer.
NOTICE!
Clogged air channels
If the material or rinsing agent reaches
into the air channels, air channels can clog
up. This can result in faulty painting
results.
– Keep spray gun horizontal or directed
downwards during the rinsing process.
Operation
02/2020
EcoGun 2100 - MSG00004EN
17/52
