WARNING!
Danger from harmful or irritant sub-
stances
Serious injuries or death can result if you
come into contact with dangerous fluids or
steam.
– Spray gun Check regularly for leakage.
Observe local regulations and mainte-
nance schedule.
– Ensure that the forced ventilation is
operational.
– Follow the safety data sheet.
– Wear specified protective clothing.
– Avoid contact (e.g. with eyes, skin).
6.2
General notes
Perform the following checks during opera-
tion:
All hoses are in order.
All connections are in order.
The air cap is clean.
The spray gun is clean.
The connection between the material
connection and the tapering seal on the
material feed line is correct.
6.3
Adjustment
6.3.1 Withdrawal force
Personnel:
Operator
+ additional qualification explosion pro-
tection
+ Additional qualification high pressure
Protective equipment:
Protective workwear
Respiratory protection device
Face protection
Use ear protection
Protective gloves
Safety boots
3. Set the material pressure.
Keep the material pressure as
low as possible. Lower material
pressure reduces the wear on the
nozzle and increases the effi-
ciency coefficient of the spray
gun.
4. Adjust flat jet
For easier operation of the spray gun, adjust
the triggering force to the material pressure.
Fig. 3: Adjusting the withdrawal force
Perform one of the following steps:
1. Screw-in adjusting screw (1) completely.
ð
This raises the withdrawal force.
2. Unscrew adjusting screw (1) completely.
ð
This reduces the withdrawal force.
Operation
02/2020
EcoGun 2100 - MSG00004EN
11/52
