Flammable coating materials and their deter-
gents and cleaning agents can cause a fire
or an explosion.
Ensure that the flashpoint of the fluid is at
least 15 K above the ambient tempera-
ture.
Note explosion group of the fluid.
Follow the safety data sheet.
Ensure that forced ventilation and fire
protection equipment are in operation.
Do not use sources of ignition and open
light.
Do not smoke.
Ground the spray gun.
Danger from harmful or irritant sub-
stances
Serious injuries or death can result if you
come into contact with dangerous fluids or
steam.
Spray gun Check regularly for leakage.
Observe local regulations and mainte-
nance schedule.
Ensure that the forced ventilation is
operational.
Follow the safety data sheet.
Wear specified protective equipment.
Escaping material
Material leaking under high pressure can
penetrate the body. Even if the injury looks
like a harmless cut wound, the penetrating
material leads to amputation, serious injuries
can cause death.
Do not try to seal leakages using body
parts, gloves or towels.
If there are injuries, seek medical atten-
tion immediately.
Before working on the product:
Purge the system, in which the product is
installed.
Disconnect the system, in which the
product is installed, from compressed air
and material supply.
Depressurize the lines.
Secure the system against being
switched on again.
Noise
The sound pressure level during operation
may cause severe hearing damage.
Wear ear protection.
Do not spend more time then necessary
in the work area.
Hot surfaces
During normal operation the surfaces of
components can get extremely hot. Contact
with it can cause burns.
Before carrying out any work:
Check the temperature.
Do not touch hot surfaces.
Let components cool down.
Wear protective gloves.
2.4
Staff qualification
WARNING!
Inadequate qualification
Wrong estimation of dangers can cause
serious injury or death.
– Only sufficiently qualified persons may
execute all work.
– Some work requires additional qualifi-
cation. Additional qualifications of spe-
cialized personnel are marked with a
“+”.
This document is intended for qualified per-
sonnel in industry and craftmanship.
Operator
The operator is trained specifically for the
field of work in which he works.
Furthermore, the operator possesses the fol-
lowing knowledge:
Technical Measures for occupational
safety and health
The operator is responsible for the following
work:
Operate and monitor the system/ product.
Introduce measures in the event of faults.
Clean system/ product.
Safety
02/2020
EcoGun 2100 - MSG00004EN
7/52
