Observe the following when selecting the
nozzle:
The larger the nozzle size (1), the more
material can escape.
The greater the angle (2), the wider is the
spray pattern.
1. Select a suitable nozzle.
2. Select an air valve suitable for the nozzle.
Align spray jet
Fig. 6: Align air cap
The spray pattern is set correctly, if a hori-
zontal or vertical spray jet is in the form of an
ellipse. The position of the air cap and of the
nozzle determines the direction of the spray
pattern.
Personnel:
Operator
+ additional qualification explosion pro-
tection
+ Additional qualification high pressure
Protective equipment:
Protective workwear
Respiratory protection device
Face protection
Use ear protection
Protective gloves
Safety boots
Fig. 7: Align spray jet
1. Tilt up retainer lever by 90°.
ð
The spray gun is locked.
2. Rotate screening (1) in clockwise direc-
tion into the required position. For that
purpose, rotate the cap nut (4).
ð
The air valve (3) and the nozzle (2)
rotate along.
3. Tilt down retainer lever by 90°.
ð
The spray gun is unlocked.
Operation
02/2020
EcoGun 2100 - MSG00004EN
13/52