NOTICE!
Situations that can lead to material
damage.
ENVIRONMENT!
Situations that can lead to environmental
damage.
Additional information and recom-
mendations.
2.2
Intended Use
Use
The material pressure level high pressure
spray gun
Eco
Gun 2100 with pump support
in the high-pressure range is meant exclu-
sively for hand guided coating of surfaces. It
is for coating surfaces with flammable and
non-flammable paints, within the specified
technical data
The material pressure level high pressure
spray gun
Eco
Gun 2100 is only intended for
use in industry and craftsmanship.
The
Eco
Gun 2100 spray gun is approved for
use in Ex zones 1 and 2.
Misuse
Not using as intended entails danger to life.
Examples of wrong use are:
Aiming the spray gun at humans or ani-
mals.
Reaching into the spray jet.
Atomization of fluid nitrogen
Use of unapproved materials
Combination of the spray gun with com-
ponents that are not approved by Dürr
Systems for operation.
Unauthorized modifications
Use in explosive areas Ex zone 0
EX labeling
II 2G T60 °C X
II
- Device group II: all areas except
mining
2G
- Device category 2 for gaseous
ex-atmosphere
T60 °C - Surface temperature, max. 60°C
X
- Specific operating conditions for
safe operation
The following conditions must be observed
for safe operation with flammable materials:
Ground spray gun through the cables and
pump.
Only use conductive hoses.
Ensure that static electricity can be dis-
charged.
2.3
Residual risks
Explosion
Sparks, open flames and hot surfaces can
cause explosions in explosive atmospheres.
Serious injury and death could be the conse-
quence.
Before carrying out any work, make sure
that there is no explosive atmosphere.
Do not use sources of ignition and open
light.
Do not smoke.
Ground the spray gun.
Ground the work piece.
Only use conductive lines.
Safety
02/2020
EcoGun 2100 - MSG00004EN
6/52
