Draft - Not for Release - 9510-065-D-3-10
18
NC
NO
P7
20 19 18 17 16
15 14 13
12 11
10 9 8
7
6
5
4
3 2 1
Gate Tracker
(Quad Box Shown)
Remote Alarm Reset Station
(DoorKing P/N 1404-080 Only)
MUST be mounted in the line-of-sight
of the gate operator.
Auxiliary Stop using Magnetic Switch
Jumper is placed from terminal #7 to #8
ONLY when using the auxiliary stop.
Red Alarm Output Terminal
Blue Alarm Reset Terminal
White Common Terminal
Jumper
N.O.
N.C.
Com
Operator Cycling
Magnet Engaged
2.6 Auxiliary Device Wiring
Gate Tracker -
DoorKing Access Control System (Model 1833, 1835, 1837 or
1838) tracker system can be connected. This system can keep track of gate
operator cycle count, shorted inputs, loop detector problems, any forced entry
attempts, if the gate has struck anything during the open or close cycle,
power interruptions, etc. For more detailed information refer to the Tracker
Installation and Wiring Manual, DoorKing P/N 2351-010.
Terminal #2 (Full open) or #5 (Partial open) required only if the tracker
board will activate the gate operator. Refer to the manual 2351-065 for
detailed information.
N.O.
N.C.
Com
Operator Stopped
Magnet Disengaged
4404-010
Summary of Contents for Series 9500
Page 2: ......
