9510-065-D-3-10 - Draft - Not for Release
27
SECTION 4 - OPERATING INSTRUCTIONS
WARNING
-
To reduce the risk of injury or death:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. Never let children operate or play with gate controls. Keep the remote control away from children.
3. Always keep people and objects away from gate.
NO ONE SHOULD CROSS THE PATH OF THE MOVING GATE
.
4. Test the operator monthly. The gate MUST reverse on contact with a rigid object or stop or reverse when an object
activates the non-contact sensors. After adjusting the force or the limit of travel, retest the gate operator. Failure to
adjust and retest the gate operator properly can increase the risk of injury or death.
5. Use the emergency release only when the gate is not moving and power has been shut-off.
6. KEEP GATES PROPERLY MAINTAINED. Read the owner's manual. Have a qualified service person make repairs to gate
hardware.
7. The entrance is for vehicles only. Pedestrians must use separate entrance.
8.
SAVE THESE INSTRUCTIONS
.
Unlock (If padlocked) and remove the
cover (See section 1.2 Removing
cover on page 10) to gain access to
these controls and the motor reset
button (On select models).
4.1 Built-In Controls and Reset Buttons Description
Reset Button
- Used to
turn off the entrapment
alarm and to reset the
operator after a
HARD
shutdown has occurred.
Accessible without
removing the cover.
Motor Reset Button
On select models. Used to
reset the motor when
weight overload or
overheating occurs.
Press firmly to reset.
AC Power Switch
- Powers the
operator ON or OFF.
Yellow push button is inert.
Push to Operate Button
- Used to
cycle the operator. It will use the
auto close timer if turned on to
close the gate.
Opens gate fully.
3-Push Button
- Used to open,
close or stop gate. Does NOT use
the auto close timer. Overrides
other opening devices.
Opens gate fully.
IMPORTANT SAFETY INSTRUCTIONS
PUSH
TO
O
PERA
TE
tec
hn
ici
an
use
on
ly
OFF
ON
OPEN
CLOSE
STOP
Alarm Siren
Summary of Contents for Series 9500
Page 2: ......
