Draft - Not for Release - 9510-065-D-3-10
26
1
2
5
6
11
13A
13B
13E
25
16
17
U
L1 L2/N
B-
B+
V
W
PE
PE
Mode
EPM
Speed
Controller
1.0
PE
SCM series
basic I/O control
1
2
5
6
11
13A
13B
13E
25
16
17
U
L1 L2
L3
B-
B+
V
W
PE
PE
Mode
EPM
Speed
Controller
3.6
SCM series
basic I/O control
3.6 Speed Controller Adjustment
Select 9500 models are equipped with a speed control module that allows you to adjust the speed of the gate from 0 to 2 ft/ sec
or 0 to 4 ft/sec on the high speed models. To adjust the speed, simply rotate the speed control knob clockwise to increase the
gate speed, or counter-clockwise to decrease the gate speed. The digital readout on the speed controller will display the gate
speed.
The 10:1 gear reducer 9500 models are equipped with a speed brake. It is automatically controlled by the speed controller and
needs
NO
adjustment. There is a manual release lock on the speed brake that must be unlocked before the gate can be manually
operated (See section 4.3 manual release on page 29 for further information).
1 ft/s
.5 ft/s
0 ft/s
2 ft/s
1.5 ft/s
1 ft/s
.5 ft/s
0 ft/s
2 ft/s
1.5 ft/s
Speed Control Knob
0 to 2 ft/sec
Speed Brake On Select Models
Min Max
Speed
2 ft/s
1 ft/s
0 ft/s
4 ft/s
3 ft/s
Speed Control Knob
0 to 4 ft/sec
Speed Control Knob
0 to 2 ft/sec
Speed Brake
Manual Release
Min
Max
Speed
9500 with Single Phase Motor
9500 Models with 3 Phase Motor
NO
adjustment is needed for the speed brake.
Summary of Contents for Series 9500
Page 2: ......
