10,000kms and adjust the pressure.
1.Front tyres 2.Rear tyres
3.Spare tyre
Ⅳ
.Repair
1.Wheels1．
Disassembly
1).Loose the screws 180 degrees.(half circle)
2)Jack up the vehiecle.
3)Remove the tyres.
Torque of bolts:50-80N.M
Attention:
Don
’
t follow the way of heating to loose the over-tight wheels
because heating can reduce the life-span of the wheels and
do
harm to the bearing of the wheels.
Fixing.
The bolts of the wheel should be tighten in turn to avoid
the
spoilage of the wheels or brake disk as shown from the right
illustration.
2.Tyre2
Disassembly & Fixing.
Follow the equipments’instructions when disassembling or fixing the tyre. Don’t use manul
tools only because they may spoil flange or the rim.
Attention
Don’t stand on the tyres when inflating the tyres. Otherwise, the tyres may be spoiled and
cause injuries. Otherwise, the flange may be broken and cause serious injury.
Inflate the tyre according to the described pressure in the manul. If the flange isn
’
t set
well, the tyers should be re-lubricated before re-inflating.
Over-inflating may spoil the tyres and cause injury.
Repair
There are various type of materials and ways of tyre-repair. Not all the materials or the
ways fit all tyres, so the manufacturers publish detailed instruction on how to maintain tyres
in time. All the instructions are available from the manufacturers.
-
