Brake disc and pad (front)
Check
1) Discharge the wheel and caliper, but do not take away brake pipe from
the caliper.
2) Change the brake disc and its gasket when it is over damaged (details
please as per chapter 6). Tightening torque of caliper’s bolt should meet
the technical requirements.
Notice:
When tramp the brake pedal, check the brake pad friction spacer
if there’s noise with the arrester. If over damaged and worn, should
change the right and the left brake pad together.
Brake drum and brake shoe(rear)
Check
1) Remove tire and brake drum.
2)
Check rear brake drum whether it is over damaged and worn. And check
the leaking problem of brake cylinder while removing the tire and brake
drum. Change it when it’s necessary (as per chapter 6).
Brake tube and oil tube
Check
Do the checking under the enough bright light. Use checking mirror
necessarily. Check the brake tube and oil tube whether
appropriate or not. Change it when it is leaking, cracking,
blocking, wearing, eroding, bending, torturing and some other
damage. Please change it when necessary.
Caution:
After changing the brake tube and oil tube, please exhaust
the air.
Brake liquid
Inspection
1)
Repair brake pump and oil tank when they are found leaking.
2)
Inspect the oil level
If the oil level is below the minimum storage mark, it should be re-added with required brake liquid.
Brake liquid: Refer to the liquid kettle cover.
Details please as per chapter 6 “cars maintenance”
Caution:
Since the car has been added with brake oil before delivered, and marked on the liquid storing kettle cover,
when you add again, please use the same kind of brake oil, or it may arouse seriously damage.
1.
Liquid storing kettle
2.
Cap of the kettle
